ESCO EPA Universal Practice Test

These questions are part of the practice quiz. Start practicing

• Leaks must be repaired on industrial process and refrigeration units with a 50-pound charge or greater when the annualized leak rate reaches _____ or more?
• Which certification is necessary for handling refrigerants?
• Which of the following refrigerant categories is most likely to harm the ozone layer?
• What is required for persons handling refrigerant during maintenance of small appliances?
• Which of the following is a sign that a low-pressure system might have a leak?
• How does the vapor-compression refrigeration cycle operate?
• Where is the purge unit typically located in a low-pressure system?
• If a system's annualized leak rate exceeds the allowable percentage, what must be performed?
• A high-pressure appliance containing 210 lbs. of R-407C refrigerant must be evacuated to a level of;
• Why are low-pressure systems unlikely to have air and moisture enter the system?
• To process refrigerant to a level equal to new (virgin) product specifications as determined by chemical analysis defines:
• A single chlorine atom can destroy how many ozone molecules?
• Which international agreement regulates the production and use of CFCs and related substances?
• System-dependent recovery methods are permitted only on appliances containing what maximum amount of refrigerant?
• What does the term "eco-friendly refrigerant" signify?
• What is one of the core objectives of the SNAP program?
• Under what condition must the owner keep records of refrigerant added to a low-pressure system?
• What is a major characteristic of the R-134a refrigerant?
• What could be a consequence of failing to detect leaks in HVAC systems?
• What are common causes of HVAC system failures?
• A refrigerant sensor which will sound an alarm and automatically start a ventilation system in occupied equipment rooms falls under ASHRAE Standard;
• How often must technicians renew their EPA certifications?
• What is an important benefit of complying with refrigerant regulations?
• What may be necessary during the evacuation of systems with large amounts of water to prevent freezing?
• A comfort cooling system that contains 50 pounds or more of R-410A is leaking. What will be the new maximum allowable annual leak rate starting in 2019?
• Which refrigerant is classified as an HFO?
• What happens if non-condensable gases enter the refrigerant system?
• A new split system should be checked for leaks by?
• How can technicians ensure compliance with EPA regulations?
• Which of the following has the highest Ozone Depletion Potential?
• If the system pressure is 0 psig after installing a fitting for recovery, what is the next step?
• When pressurizing a system with nitrogen, which option is correct?
• Clean refrigerant for reuse by separating the oil from the refrigerant and removing moisture from the refrigerant by passing it through one or more filter driers, is the definition of;
• What is the primary benefit of utilizing nitrogen during leak testing?
• In what way can improper handling of refrigerants impact the environment?
• Which type of refrigerants generally requires more stringent handling procedures?
• What is the maximum allowable leak rate for non-exempt equipment according to EPA regulations?
• Which ASHRAE classification means slightly flammable?
• What is the maximum allowable annual leak rate for a low-pressure chiller before it must be repaired?
• What is the function of a chiller?
• Which of the following refrigerants is considered an ozone-depleting substance?
• Which statement best describes the purpose of the Section 608 certification?
• When encountering an outdated refrigerant, what must a technician ensure in relation to disposal?
• What conditions allow for a system to be opened and repaired without recovering the refrigerant to the required vacuum level?
• What standard pressure is characteristic of R-410A refrigerant in operation?
• Which HC refrigerant can be used in new domestic small appliances?
• What role does the evaporator coil play in the refrigeration process?
• What is the recommended action for a refrigerant trace gas and nitrogen mixture after a leak is detected?
• Under ASHRAE Standard 34, how is R-134a classified?
• Which of the following is an example of a non-ozone depleting refrigerant?
• What is one reason technicians are advised to recover refrigerants?
• Refrigerant should be recovered from the condenser outlet if the condenser is?
• After liquid has been removed from a 350-ton low-pressure appliance, how much vapor refrigerant approximately remains?
• What is the EPA-required evacuation level for recovery or recycling equipment used on low-pressure systems?
• What is the primary role of a compressor in the refrigerant cycle?
• When using a system-dependent recovery system, what should a technician do with an operating compressor?
• Which option accurately describes the refrigerant recovery process from an R-123 system?
• When using a system-dependent recovery on a unit with a non-operating compressor, a technician should:
• What is the primary function of a recovery machine in HVAC?
• What type of personal protective equipment (PPE) is typically used when working with refrigerants?
• According to the Standard for machine room safety, which standard is referenced?
• What is the primary purpose of a crankcase heater in a refrigeration system?
• What is R-410A refrigerant commonly used for?
• What is a requirement for recovery equipment manufactured after November 15, 1995?
• How much can a person be fined per day per violation for knowingly releasing a regulated substance that violates the Clean Air Act?
• Why is training in proper refrigerant handling critical for HVAC technicians?
• What does “venting” of refrigerants refer to?
• What happens when recovering multiple types of refrigerants in the same cylinder?
• What is the Significant New Alternatives Policy (SNAP) Program?
• For efficient operation, what should be the suction pressure in a low-pressure refrigeration system?
• When charging a low-pressure system, what is the minimum saturation temperature for introducing refrigerant as vapor?
• What is the primary purpose of the EPA refrigerant regulations?
• Which of the following refrigerants is classified as a very high-pressure refrigerant?
• What might indicate a potential refrigerant leak when servicing a refrigeration unit?
• When refrigerant is heated above the saturation temperature, what state does it remain in?
• What is the main advantage of using environmentally friendly refrigerants?
• Where is refrigerant added during the charging process of a low-pressure system?
• What is the function of personal protective equipment (PPE) when handling refrigerants?
• What is the required condition for refrigerant recovery before system repair?
• Why is proper recovery of refrigerants critical?
• What should be done with refrigerants removed from a system?
• What is the role of pressure gauges in HVAC systems?
• What action must be taken if a technician encounters a refrigerant that is no longer permitted?
• The molecule found in CFCs and HCFCs that depletes ozone is:
• What is the maximum pressure allowed when pressurizing a low-pressure system for leak-detection purposes?
• What critical component does filter maintenance directly impact within HVAC systems?
• What is the typical diameter of a refrigerant recovery cylinder used in common applications?
• How can refrigerant leaks be effectively detected?
• A refrigerant cylinder designed to hold recovered refrigerant has a:
• If regulations change after a technician becomes certified, what is the technician's responsibility?
• What is a required practice when handling refrigerants?
• What are natural refrigerants primarily recognized for?
• What should technicians keep track of to adhere to EPA guidelines regarding refrigerants?
• What are the benefits of using energy-efficient refrigerants?
• In addition to pressure, what other aspect is essential for R-410A performance?
• What is the primary measure to prevent high discharge pressure in a refrigeration system?
• What should be done with refrigerants like Ammonia and Hydrogen in small appliances?
• What verification is required for recovery equipment?
• What must recovery equipment be capable of recovering from a non-operating system compressor?
• What is the principle of heat exchange in HVAC systems?
• Which agency is responsible for enforcing regulations concerning refrigerants in the U.S.?
• What is one of the objectives of using a leak detection solution?
• What is a common characteristic of HFC refrigerants?
• Refrigerants CFC-12, HCFC-22, and HFC-134a are all classified as Type _______ substances?
• What type of equipment can a technician work on with a Type III certification?
• Which method is the most efficient for leak checking a charged low-pressure refrigeration unit?
• Crop loss, eye disease, and skin cancer have been linked to which environmental issue?
• Why is it important for technicians to recover refrigerants?
• What could be a consequence of failing to repair a leak in a refrigeration system?
• Which organization is responsible for establishing the refrigerant safety group standard?
• Reusable refrigerant containers under high pressure must be hydrostatically tested how often?
• What characterizes system-dependent or passive recovery equipment?
• What type of refrigerants should be collected separately?
• A straight piece of tubing (process stub) in small appliances is used for what purpose?
• Which of the following is a common consequence of failing to comply with EPA refrigerant regulations?
• What effect does applying heat with a heat gun to a compressor have during recovery?
• All HVAC/R systems must be protected by a?
• How can technicians effectively reduce refrigerant loss during service?
• EPA regulations state that removal of which component constitutes a "major repair"?
• What certification is required to repair a chiller operating with R-22?
• Which substance is commonly used during a leak test?
• What should be the focus of a technician when assessing refrigerant types?
• Which type of certification is required for technicians servicing sealed systems on small appliances?
• How does the EPA define a small appliance?
• Why is leak detection important in HVAC systems?
• What must be done with the refrigerant vapor vented off the top of a charging cylinder?
• What does the Global Warming Potential (GWP) measure?
• What is the primary method for recovering refrigerants?
• Why is filter maintenance critical in HVAC systems?
• What should you never do when a system is in deep vacuum?
• What is a technician's responsibility regarding EPA regulations during refrigerant recovery?
• What is true about refrigerant leaks on small appliances?
• The low-side test-pressure data-plate value should be used by a technician to determine a safe pressure for:
• What is the function of the expansion valve in a refrigeration system?
• Approximately how much pressure should R-410A maintain during testing and operation?
• What does EPA stand for in the context of the ESCO EPA Universal Exam?
• Why is it essential for HVAC technicians to have EPA certification?
• What environmental effect is primarily associated with the breakdown of ozone molecules?
• What critical knowledge does EPA certification provide to HVAC technicians?
• What is the consequence of neglecting filter maintenance in HVAC systems?
• Before shipping any used refrigerant cylinders, check that the cylinder meets what standards:
• When dehydrating a system, it should be evacuated to a minimum level of;
• Which of the following refrigerants has a GWP closest to "1"?
• When should recovery strategies be modified for appliances known to have existing leaks?
• EPA regulations require that all Industrial Process Refrigeration (IPR) systems containing more than 50 pounds of refrigerant MUST be repaired when the annual leak rate exceeds;
• How do HFC refrigerants differ from CFCs?
• What is the burst pressure of a rupture disk on a low-pressure chiller?
• What procedure should be followed for disposing of used refrigerants?
• Proper recovery techniques require the use of recovery equipment certified by which entity?
• When did the U.S. begin phasing out HCFCs?
• Why are R-22 refrigerants being phased out?
• Silicone elastomers, for use in seals and gaskets, are not compatible with which refrigerants?
• What is a consequence of not adhering to regulations during refrigerant recovery?
• What must recovery equipment be capable of on a system with an operating compressor?
• When more than one pressure relief valve is installed, how should they be configured?
• What does a dry charge refer to in regard to refrigerants?
• When conducting leak testing on a low-pressure chiller, what is the maximum pressure that should be used?
• How are leaks in a refrigeration system typically repaired?
• Unless plans are made to replace a system with a leak rate that exceeds the maximum leak rate, repairs must be made within;
• What could a strong odor indicate during the refrigerant recovery process?
• What is the purpose of desiccants in refrigeration systems?
• Which of the following refrigerants has a safety classification of B-1?
• What action must technicians take if a refrigerant leak is detected?
• In a low-pressure chiller, where do air and other non-condensables collect?
• What is an acceptable method for pressurizing a refrigerant system?
• What type of refrigerant is commonly used in low-pressure systems?
• What is the behavior of chlorine in CFCs and HCFCs in water?
• If a strong odor is detected during refrigerant recovery, what is likely to have occurred?
• If an appliance exceeds the threshold leak rate, how long does the owner have to retrofit or retire it if using an exempt refrigerant?
• Which of the following can be used to flush a system after refrigerant recovery?
• Which refrigerant is considered less harmful to the ozone layer?
• What is the role of the refrigerant in a cooling system?
• Which of the following is NOT a method to reduce refrigerant loss?
• An ozone molecule contains:
• What must the equipment owners/operators include in recovered refrigerant records for equipment with refrigerant charges that range from 5 to 50 pounds?
• What type of impact do high-pressure refrigerants have in comparison to low-pressure ones?
• What type of refrigerants does the EPA consider as natural refrigerants?
• What is the estimated R-value of common refrigerants such as R-410A?
• What is the main purpose of a purge unit in a low-pressure refrigeration system?
• Recover any remaining refrigerant and then render the cylinder useless, then recycle the metal is the proper disposal method for:
• What does the term “retrofit” mean in HVAC systems?
• The condenser _______________________________________.
• What type of refrigerant is R-22 classified as?
• Which type of refrigerant contains no chlorine?
• What should be done to achieve accuracy when adding refrigerant to a charging cylinder?
• What elements are contained in HCFCs?
• Which type of refrigerant is noted for low environmental impact?
• What is a recycling machine used for in HVAC systems?
• What is the primary purpose of recovery equipment in refrigeration systems?
• What function does a service valve serve in a refrigerant system?
• A high-pressure appliance containing less than 200 lbs. of an HCFC or HFC refrigerant must be evacuated to a level of;
• What is the standard pressure for R-410A at room temperature?
• What is the purpose of pressurizing a system with an inert gas during leak checks?
• What must be included in the leak inspection records for an appliance with a significant refrigerant leak?
• When recovering refrigerant from a medium-pressure system with more than 200 lbs. of refrigerant, recover to a level of?
• What should technicians do if they overfill a refrigerant system?
• What does self-contained or active recovery equipment use for refrigerant recovery?
• The compressor ____________________________________.
• Which of the following substances is classified as a non-condensable?
• Non-condensables will cause?
• What is one primary role of a chiller in an HVAC system?
• In refrigeration, what happens when the refrigerant in the evaporator coil absorbs heat?
• What is a key difference between high-pressure and low-pressure refrigerants?
• Why are Safety Data Sheets (SDS) critical in handling chemicals?
• What does the acronym ASHRAE stand for?
• What certification is needed specifically for handling small appliance refrigerants?
• What is the main objective of the Montreal Protocol?
• To improve the efficiency of recovery during a system flush, what is the recommended method?
• If a leaking appliance with a regulated refrigerant is not going to be repaired, it must be?
• Why is it essential to wear gloves and goggles while handling refrigerants?
• What can be used to pressurize a chiller system before opening it for a non-major repair?
• HFCs ________;
• When servicing a low-pressure refrigeration system, what is essential to prevent refrigerant contamination?
• What should technicians prioritize when performing maintenance on HVAC systems?
• What is the primary purpose of refrigerant recovery?
• How must refrigerant recovery cylinders be labeled?
• Which of the following refrigerants is noted to have a low environmental impact?
• What environmental concern is associated with traditional refrigerants like CFCs?
• Why is regular maintenance important for HVAC systems?
• In what scenario is it most important to perform air filter maintenance?
• When using a recovery unit on a system containing 100 lbs. of R-410A it must be evacuated to?
• What potential health effects can refrigerants have?
• What are the different categories of refrigerants classified by the EPA?